Mechanical Construction · Design-Build

Design-build mechanical construction, engineered in-house

We handle the most complex design-build projects, ensuring full mechanical integration from concept to completion — HVAC, plumbing, hydronics, and central plant carried under one contract and one accountable engineer of record for the mechanical scope.

That same engineering depth is what makes plan-and-spec execution routine for us. When we build to another engineer's documents, we are reading them as people who write them.

Primary Delivery Design-Build
Integration Concept → Completion
Coordination BIM / Clash Detection
Also Delivered Design-Assist · Plan & Spec

Design-Build

Systems too large to improvise

Full mechanical integration from concept to completion — including the projects where the equipment does not arrive through the loading dock.

A helicopter lowers a packaged rooftop HVAC unit onto the roof of a distribution center while a crew receives it at the curb.
Rooftop unit replacement executed by helicopter lift — the mechanical scope engineered, coordinated, and installed by Four Quarters, with aviation performed by a licensed lift contractor. Sets like this are planned to the minute: the roof is prepped, curbs adapted, and rigging staged so the aircraft is over the building for as little time as possible.

Concept → Completion

Load calculations, equipment selection, layout, fabrication, install, and commissioning under one contract.

Structural Coordination

Curb adaptation and roof loading resolved with the structural engineer before a single unit is ordered.

Rigging & Logistics

Crane and aerial-lift sets sequenced around occupancy, road closures, and permitted flight windows.

Single Point of Failure: None

One accountable mechanical partner from the first sketch through owner training.

Capabilities

From load calculation to commissioned system

One mechanical contractor accountable for design intent, trade coordination, fabrication, installation, and turnover documentation.

01

Design-Build Delivery

Load calculations, equipment selection, distribution design, and installation carried on a single contract. Design intent and constructability are resolved by the same party, which is what removes change orders at the seams.

DB
02

BIM Coordination & Clash Detection

Ductwork, piping, and equipment modeled and coordinated against structure, electrical, and fire protection before fabrication releases. Conflicts are resolved on screen, not in the ceiling.

BIM
03

Plan & Spec Execution

Fully scoped competitive bids off your engineer's documents. Because we engineer our own design-build work, we read a spec for what it will actually cost to build — and state exclusions plainly instead of burying them.

BID
04

HVAC Systems Installation

Rooftop units, split and VRF systems, hydronics, ductwork, and controls — installed to design intent and to service access.

HVAC
05

Plumbing Infrastructure

Domestic water, sanitary and storm, gas piping, and specialty process systems, coordinated with civil and structural.

PLB
06

Mechanical Rooms & Central Plant

Boilers, chillers, pumps, and distribution laid out for real-world service clearance, not just for the drawing.

PLANT
07

Commissioning & Closeout

Start-up, balancing, O&M manuals, as-builts, and owner training — turnover packages that don't hold up occupancy.

CX

Project Types

Scaled to the job in front of us

Ground-Up Commercial

New construction from slab to commissioning, coordinated with the full trade stack.

Tenant Fit-Out

Fast-track build-outs sequenced around landlord milestones and occupancy dates.

Renovation & Retrofit

System replacement in occupied buildings, phased so operations keep running.

Multi-Family

Repeatable unit layouts, prefabrication, and tight coordination across floors.

Institutional

Schools and civic facilities delivered inside summer windows and budget cycles.

Industrial & Warehouse

Process ventilation, high-bay conditioning, and utility distribution.

Delivery Methods

Engage us the way your project is structured

We deliver in all three models. Design-build is where we carry the most risk and return the most value — but the same engineering team stands behind a hard bid off your consultant's drawings.

  Design-Build Design-Assist Plan & Spec
We're engaged At concept During design development At bid
Our role Design + install Constructability + install Install to documents
Pricing basis Target value / GMP Open-book, refined Hard bid
Schedule influence Highest Moderate Limited
Change-order exposure Lowest Reduced Document-dependent
Best for Owners wanting single accountability Teams refining a design with cost input Fully engineered projects out to bid

Project Path

Coordinated before it's fabricated

Preconstruction

Scope review, budget development, constructability input, and long-lead equipment identified before they become schedule risks.

Coordination

BIM modeling and clash detection against structure, electrical, and fire protection — resolved on screen, not in the ceiling.

Fabrication & Install

Spool and prefab where it saves field hours, then installed by our own licensed crews on your sequence.

Commission & Turn Over

Start-up, air and water balancing, documentation, and owner training — with the service team already familiar with the building.

Why Builders Work With Us

Installed by the people who'll maintain it

In-House

Design-build and BIM handled by our team — not brokered to a third party.

One Contract

Single accountable mechanical partner for HVAC and plumbing scope.

Serviceable

Laid out for real maintenance access, because we're the ones coming back.

3 States

Greater Philadelphia, South Jersey and Northern Delaware.

Selected Projects

Work that had no margin for error

Four projects where the schedule, the site conditions or the regulator left no room to improvise.

E-Commerce Distribution · Lawrence Township, NJ

35 rooftop units, set by helicopter

Scope
Plan & spec for HVAC across a new 400,000 sq ft facility.
Challenge
Placing 35 units on a condensed timeline inside a fixed cost structure.
Approach
Helicopter installation chosen over crane lift to save time and control cost. Weather forced last-minute revisions; permitting and scheduling were re-sequenced around the forecast.
Result
Completed to the revised plan without incident, connected and commissioned inside the schedule.
“Four Quarters' expertise and problem-solving abilities enabled us to avoid problems and stay on schedule.” General contractor, e-commerce distribution project

Food Processing · Swedesboro, NJ

A food-grade plant that never stopped running

Scope
Plan & spec for HVAC and plumbing.
Challenge
Install and commission a large rooftop unit in an existing structure while the facility stayed in production.
Approach
Procurement coordinated around specialty equipment and installation protocols that hold USDA food-grade compliance.
Result
Delivered to strict government guidelines, on schedule, with the plant operating throughout.
“Scheduling and installation logistics made a very complex project run right on schedule. Their proactive communication made everything run smoothly.” General contractor, food processing project

Healthcare · Washington Township, NJ

MRI venting through a space that wasn't there

Scope
HVAC plan & spec, coordinated with an MRI installation.
Challenge
Specialty venting demanded large, intricate ductwork in a very small space on a compressed schedule.
Approach
Piped in a chiller and relocated much of the refrigerant piping to the roof, sequenced so neighbouring tenants kept trading.
Result
Every phase delivered to plan and on time.
“There was a lot of anxiety because of the complexity of the installation. Thanks to Four Quarters the job went smoothly, and everyone was able to relax.” General contractor, healthcare imaging project

Grocery Retail · Broomall, PA

A full plumbing package, underground up

Scope
Complete plumbing package for a supermarket build.
Challenge
Underground sanitary and storm, domestic water, gas piping, kitchen and bathroom fixtures, and a Jet Vac condensation system — all interdependent.
Approach
Manpower staffed to hit every deadline, with supervision dedicated to coordinating field work across trades.
Result
Completed to code and to owner specification.
“This was a project that called for a wide range of expertise and coordination. Four Quarters made it all happen.” General contractor, grocery retail project

Since 1990

Serving New Jersey, Pennsylvania and Delaware.

5k–1.5M sq ft

Project scope, from a single fit-out to a distribution campus.

75% Repeat

Of general-contractor and service customers come back.

70% Retained

Of personnel have stayed with us since the company began.

NJ licensed in plumbing and HVAC · NJ State Inspector's License for plumbing · OSHA certification held by 10 field personnel · plumbing and HVAC work split roughly 50/50.

Send us the drawings

Share your plans, specs, or even a napkin sketch. We'll come back with scope, budget, and the long-lead items you should know about now.